Vehicle and prop design - Project 1

Jonathan Djap Tirtajaya (0337579)

Vehicle and Prop Design, Taylors University
Project 1

LECTURE NOTES

<iframe src="https://drive.google.com/file/d/1W_q5M6H4BTLeq9B8yCQBlDryZC5cYsL9/preview" width="640" height="480"></iframe>

Miro board: https://miro.com/app/board/o9J_lK3OSB8=/

references:

on organic, I can look at horizon zero dawn, or ark survival, StarWars, subnautica, jellyfish. For mechanics, there is blade runner, cyberpunk, Tron, batman vehicles.

Figure 1.1 Thumbnail sketches 1 (ground vehicle)

I wanted to focus on the idea of a single wheel for the ground vehicle.

Figure 1.2 Thumbnail sketches 2 (aircraft)

Figure 1.3 Thumbnail sketches 3 (watercraft)

Figure 1.4 progressive blockout 1 (ground vehicle)

Figure 1.5 progressive blockout 2 (watercraft)

Figure 1.6 progressive blockout 3 (aircraft)

Figure 1.7 Progressive sketch 1 (aircraft)

Figure 1.8 Progressive sketch 2 (watercraft)

Figure 1.9 Progressive sketch 3 (ground vehicle)

Figure 2.0 Further sketch 1 (ground vehicle)

Figure 2.1 Further sketch 2 (ground vehicle)

Figure 2.2 Further sketch 3 (watercraft)

Figure 2.3Further sketch 4 (watercraft)

Figure 2.4 Further sketch 5 (watercraft)

Mr Kannan said that I could pick between the 2 ideas as both are decent ideas, but I ended up choosing the legged vehicle as I have a clearer idea for it.

Figure 2.5 Improve ideation watercraft

Figure 2.6 Further sketch (aircraft)

Figure 2.7 Further sketch (aircraft)

Figure 2.8 Further sketch (aircraft)

Figure 2.9 rough value painting (aircraft)

Figure 3.0 rough value painting (ground vehicle)

Figure 3.1 rough value painting (watercraft)